07
2020
-
02
Maintenance instructions for industrial sewing machines
The use of sewing machines requires frequent cleaning and lubrication to ensure the normal operation of the machine. 1. Cleaning of sewing machine: Cleaning of feed teeth: Remove the screws between the needle plate and feed teeth, remove lint and dust, and add a small amount of sewing machine oil. (2) The cleaning of shuttle bed is the core of sewing machine work and also the most prone to malfunction. Therefore, it is necessary to regularly remove dirt and use a small amount of sewing machine oil. (3) The surface of the sewing machine and all parts inside the panel should be cleaned regularly. 2. Special sewing machine oil must be used for oiling and lubrication of the sewing machine. The sewing machine should be fully equipped after continuous use for one or a few days
The use of sewing machines requires frequent cleaning and lubrication to ensure the normal operation of the machine.
1. Cleaning of sewing machine
Clean the feeding teeth by removing the screws between the needle plate and the feeding teeth, removing any lint and dust, and adding a small amount of sewing machine oil.
(2) The cleaning of shuttle bed is the core of sewing machine work and also the most prone to malfunction. Therefore, it is necessary to regularly remove dirt and use a small amount of sewing machine oil.
(3) The surface of the sewing machine and all parts inside the panel should be cleaned regularly.
2. Special sewing machine oil must be used for oiling and lubrication of the sewing machine. After continuous use for a day or a few days, the sewing machine should be fully oiled. If oiling is done between uses, the machine should be run idle for a period of time to allow the oil to fully soak and shake off excess oil. Then, use a clean soft cloth to wipe the machine head and tabletop clean to avoid dirtying the sewing material. Then thread and sew the broken fabric, use the motion of the sewing thread to wipe it clean, and throw out any excess oil stains until there are no oil stains on the broken fabric, and then proceed with formal sewing.
The refueling parts include: (1) various oil holes on the machine head, lubrication upper shaft, and components connected to the upper shaft. (2) The components inside the panel and the movable parts connected to each component. Lubricate the presser foot rod, needle rod, and the components connected to them. (3) Clean the moving parts of the lower components of the machine and add less oil.
The amount of fuel added to each refueling hole and refueling area does not need to be too much, just one or two drops are enough.
Secondly, when maintaining a sewing machine, the following points should also be noted:
After the work is completed, insert the needle into the needle hole plate, lift the presser foot, and cover the machine head with a machine cover to prevent dust from entering.
When starting work, first check the main components, the weight of the stepping, whether there are any special sounds, whether the needle is normal, etc. If any abnormal phenomena are found, they should be repaired in a timely manner.
After a considerable period of use, the machine needs to undergo a major overhaul. If any parts with significant wear are found, they should be replaced with new ones.
Grand International Enterprise INC. is a professional sewing equipment company that integrates design, development, production, installation, and service. Founded in New York, USA in 1986. The 'Baichuan Brand' high-speed wire cutting machine, the world's number one brand, is well-known and recognized in the industry. Major garment processing factories under the Hong Kong Roche Textile Industry Group around the world have been designated to use the Baichuan brand wire cutting machine to ensure clothing quality