Keep Consistent Good Quality as First Priority and Satisfy the Needs of Customers is the goal that Grand pursues
The schematic diagram of component installation is as follows:
Microcomputer direct drive motor automatic induction suction thread trimming device (direct drive motor + two or three pairs of radio-sensors + pneumatic thread cutter group + presser foot + air suction dust collection device, with JUKI heavy machine overlock sewing machine series)
1.Using servo direct drive motor and control system, super power saving;
2. Electric eye sensor, which can automatically lift the presser foot to run and sew to achieve time-saving effect;
3. Electric eye sensor, which can set the number of stitches to control the automatic stop of sewing suction and thread trimming to save money;
4. Inductive induction, the number of stitches can be set to control the two sections of automatic suction before and after sewing to achieve air-saving effect;
5. Use reflective electric eye with pneumatic cutter group, fixed knife can adjust the angle to extend the life of the cutter body; cutting and cutting can be used at the same time, maintenance-free;
6. No need for skilled employees, let new and old employees stand on the same starting line.
7, save time, materials, labor, comprehensive production capacity increased by about 30%.
8. This product is suitable for heavy machine, Yamato, Pegasus, Yinjian and domestic overlock sewing machines.
9. If there are special circumstances, please contact the engineering department directly.
Compared with similar KS \ KH products, this product has many advantages:
|GTC series thread cutting device||KS KH thread cutting device|
|1||With button type manual thread trimming function, it is easy to use in special cases||without manual thread trimming function|
|2||Front stitch can be cut||Can't cut front suture|
|3||No need to stop the cutting suture, can increase the output by 30%||Must stop the cutting suture|
|4||Back cut stitching length can be selected||Back cut stitching cannot be selected in length|
|5||Consistent stitch length after cutting to improve product quality||Uneven stitch length after cutting|
|6||Can cut elastic bands, shoulder straps, etc.||Elastic bands, shoulder straps, etc. cannot be cut|
|7||Single process sewing can save 16CM line||Can't save line|
|8||Suction air only at the moment of tangent, saving energy and reducing noise||Always sucking air while sewing|
|9||Even newbies can operate||Must be skilled|
It is suitable for the sewing operation of pants, pajamas, sportswear, work clothes, blouses and handkerchiefs.
SCAN QR CODE